An easy index
of the contents of these pages.
AMPLIFIERS AND KITS
GIRLS AND BOYS, LADIES AND GENTLEMEN, AND ALL OTHER TUBOPHILES OF ALL AGES!!!! OK, I am back! I have a few projects in the workings... including a small quitar amp project which might make it to production; a hybrid SST pre/tube output amp. Hey... why didn't anyone catch this misspelled word??? --> Regratfully<-- ;-) Gabe.
COMING SOON!!!! After rebuilding one for a friend, I have decided to put together and offer an EL84 SE amp based on the Magnavox 182-XX series chassis. 3 or so RMS watts of pure musicality only Magnavox could offer for $299!! The MAG-SE03 (LINK NOT UP YET).
NOW AVAILABLE!!!! CGV Electronic's MAG-1515 kits without transformers or chassis, for those who want to upgrade their Magnavox chassis/console finds! Here is where you can find them.
OTHER STUFF
ART! Paintings by an up and coming award winining artist... Edwina Velez... my mother! Check them out. Very well done. You can see them here.
We offer a line of high quality audio amplifiers at very reasonble consumer prices. We believe that one can have their cake and eat it too when it comes to high fidelity tube audio equipment. We offer a line of power amplifiers, integrated amplifiers, and preamps, using both Push-Pull for high power punch and Single Ended for the sweet audio experience. On this site we also have technical papers and schematics of the various circuits we have built and some from other people who wish to submit them.
We also have some interesting science subjects and discussions on subjects such as astronomy, quantum physics, and artificial intelligence, among other things. Since audio is a multi-discipline art, we also have discussions on psychoacoustics, music and geophysics.
PLEASE email
us with comments and suggestions. If you would like to make written contributions,
we would be glad to add them to this site with all rights and honorable
mentions involved. We would like this site to be your ultimate source for
electronics info. Your opinions and contributions will be highly valued.
If you have any questions please EMAIL
me.
UPDATES
UPDATE 06/09/2005
COMING SOON (Still!)
The CGV-SST1 Solid State tube preamplifier built or kit. That's right! A true tubelike sound from transistors. No hash, no graininess, just clean warm image intense sound... for a fraction of the tube cost! And built "point to point" at that!
ALSO
The CGV-PRE1 Tube preamplifier built or kit. Yes folks, an outboard tube preamp to match with just about any tube amplifier available. Includes a phono pre as well HERE! The Chassis has changed, however. It is not the one pictured, but a longer one. There was a complaint about hum, which was due to the proximity of the power transformer to the tubes. New pic coming soon.
ALSO
The MAG-1515 15 WPC Push-Pull tube amplifier built or kit.
Read all about it HERE!
NOW HERE! A 6 watt per channel SE amp or kit, 6SL7/6L6 complement.
Read about it HERE!
NOW HERE! A 300B simple cheap SE 9 watt per channel stereo amplifier (No extra cost!).
Read about it HERE!
CAUTION - In
the tube section there are projects that require dangerously high voltages.
Exersize extreme care when handling power supplies. Always wait for capacitors
to drain before working on tube equipment that has been operating. Before
working on tube equipment, make sure all caps are drained by shorting them
out with an insulated piece of wire or an insulated tool (screwdriver or
long nose pliers) taking care not to touch anything with your bare skin.
It has been discussed on the rec.antique.radio+phono group that voltage
even as low as 25 volts can do harm. This is confirmed in my little pocket
engineers handbook. Please be careful!
Feel free to
look around!
My growing collection
of Antique Radios primarily from the twenties and thirties. Some include
restoration projects and all have pictures.
Thank You!
![]() ![]() Gabe Velez. Want to join the Antique Radio Web Ring? |
---|
[Skip Prev] [Prev] [Next] [Skip Next] [Random] [Next 5] [List Sites] |